Product infos:
| General |
| Device Type: |
Router - 4-port switch (integrated) |
|
| Enclosure Type: |
Desktop |
|
| Connectivity Technology: |
Wireless, wired |
|
| Data Link Protocol: |
Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) |
|
| Frequency Band: |
2.4 GHz |
|
| Capacity: |
Concurrent IPSec tunnels: 20 ¦ Maximum number of configured SSIDs: 16 ¦ Wireless VLANs: 8 |
|
| Network / Transport Protocol: |
L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, RTP |
|
| Routing Protocol: |
OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE, policy-based routing (PBR), WCCP, Bidirectional Forwarding Detection (BFD) |
|
| Remote Management Protocol: |
Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
|
| Encryption Algorithm: |
LEAP, DES, Triple DES, SSL, PEAP, TKIP, WPA, WPA2, PKI, 128-bit AES, 192-bit AES, 256-bit AES, WEP |
|
| Authentication Method: |
RADIUS, TACACS+, Extensible Authentication Protocol (EAP) |
|
| Features: |
Firewall protection, NAT support, MDI/MDI-X switch, power over Ethernet (PoE), VLAN support, content filtering, DiffServ support, manageable, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), MIMO technology, Virtual Route Redundancy Protocol (VRRP) support, WLAN controller mode, Asynchronous Transfer Mode (ATM), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, DNS proxy, wireless bridge mode, Bidirectional Forwarding Detection (BFD), DHCP relay, Port Security, 2T3R MIMO technology, DHCP client, Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Ingress Layer 2 MAC Access Control Lists (ACLs), VPN Server, Call Admission Control (CAC), Generic Routing Encapsulation (GRE), DiffServ Code Point (DSCP) support |
|
| Compliant Standards: |
IEEE 802.1D, IEEE 802.1Q, ANSI T1.413, IEEE 802.11b, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.3ah, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), CISPR 24, EN55022, CISPR 22, EN50082-1, EN55022 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, IPv6 Ready, EN 61000-3-2:2000, EN 61000-3.3:1995 + A1:2001, KN22, EN55024:1998 + A1 + A2, EN 50082-1:1997, EN 300386 |
|
| RAM: |
256 MB |
|
| Flash Memory: |
256 MB |
|
| Status Indicators: |
Port status |
|
| Line Properties |
| Framing Format: |
ANSI T1.413 |
|
| Communications |
| Type: |
ISDN / DSL modem combo |
|
| Digital Signaling Protocol: |
ADSL2+ over ISDN, VDSL2 over ISDN |
|
| Protocols & Specifications: |
ITU G.991.2 (G.shdsl), ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5, ITU G.992.1 (G.DMT) Annex A, ITU G.992.1 (G.DMT) Annex B, ITU G.992.5 Annex M, ITU G.993.2, ITU G.992.3 Annex M |
|
| Expansion / Connectivity |
| Interfaces: |
LAN: 2 x 10Base-T/100Base-TX - RJ-45 ¦ LAN: 2 x 10Base-T/100Base-TX (PoE) - RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST ¦ Management: 1 x console - RJ-45 |
|
| Power |
| Power Device: |
External power adapter - 60 Watt |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Software / System Requirements |
| OS Provided: |
Cisco IOS Advanced IP services |
|
| Dimensions & Weight |
| Width: |
32.5 cm |
|
| Depth: |
26.4 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
2.5 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
10 - 85% (non-condensing) |
|
