Produktinformationen:
| General |
| Device Type: |
Switch - 24 ports - L3 - Managed |
|
| Enclosure Type: |
Desktop 1U |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
24 x 10/100/1000 + 4 x Gigabit SFP |
|
| Performance: |
Forwarding performance (64-byte packet size): 38.7 Mpps |
|
| MAC Address Table Size: |
12K entries |
|
| Routing Protocol: |
RIP-1, RIP-2, HSRP, static IP routing, RIPng |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2 |
|
| Authentication Method: |
Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
|
| Features: |
Full duplex capability, Layer 3 switching, Layer 2 switching, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, ARP support, trunking, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, manageable, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR), Per-VLAN Spanning Tree Plus (PVST+), Cisco EnergyWise technology, Uni-Directional Link Detection (UDLD), Link Aggregation Control Protocol (LACP) |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
|
| RAM: |
128 MB |
|
| Flash Memory: |
32 MB Flash |
|
| Status Indicators: |
Port transmission speed, port duplex mode, system, RPS (Redundant Power Supply), link/activity |
|
| Expansion / Connectivity |
| Interfaces: |
24 x 1000Base-T RJ-45 ¦ 1 x console RJ-45 management ¦ 4 x SFP (mini-GBIC) |
|
| Power |
| Power Device: |
Internal power supply |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Power Consumption Operational: |
100 Watt |
|
| Features: |
Redundant Power System (RPS) connector |
|
| Miscellaneous |
| MTBF: |
230,700 hours |
|
| Compliant Standards: |
FCC Class A certified, TUV GS, GOST, BSMI CNS 13438 Class A, CISPR 24, cUL, NOM, VCCI Class A ITE, EN55024, EN55022 Class A, CISPR 22, CSA 22.2 No. 60950, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, EMC, FCC Part 15, MIC, UL 60950-1, IEC 60950-1, EN 60950-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Base |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
37.8 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
5.4 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
10 - 85% (non-condensing) |
|
| Min Storage Temperature: |
-25 °C |
|
| Max Storage Temperature: |
70 °C |
|
